应该是NX Nastran 怎么安装的吧？看不懂
! ########### UGS Corporation NX Nastran General Notes ############### ! ######################################################################### ! ### ### ! ### This file contains notes about NX Nastran 5 ### ! ### ### ! ### ### ! ### ### ! ######################################################################### ! ######################################################################### TABLE OF CONTENTS 1. Who should install NX Nastran 2. Installation Notes 3. Operating System Requirements 4. Environment variable setting 5. NX Nastran 5.0 settings 1. Who should install NX Nastran -------------------------------------------------------------------------- NX Nastran is a finite element solver that is used by many NX products and requires this separate install from NX. If you have any one of the following NX Simulation products, you should install NX Nastran: NXN110 - NX Nastran Desktop NXN110G - NX Nastran Desktop NX13500 - NX Mach 3 Advanced Simulation NX13501 - NX Mach 3-E Advanced Simulation UG13500 - NX Advanced Simulation NX30504 - NX Design Simulation UG30504 - NX Design Simulation NX Nastran also is used for wizards in the following Design and Manufacturing products and you should also install for these NX11110 - NX Mach 1 Design (FL) NX11111 - NX Mach 1-E Design NX12100 - NX Mach 2 Product Design NX12101 - NX Mach 2-E Product Design NX13100 - NX Mach 3 Product Design NX13101 - NX Mach 3-E Product Design NX14100 - NX Mach 4 High Tech Design NX14101 - NX Mach 4-E High Tech Design NX13300 - NX Mach 3 Industrial Design NX13301 - NX Mach 3-E Industrial Design NX13200 - NX Mach 3 Mold Design NX13210 - NX Mach 3 Progressive Die Design NX12400 - NX Mach 2 Machining NX12401 - NX Mach 2-E Machining NX12410 - NX Mach 2 Advanced Machining NX12411 - NX Mach 2-E Advanced Machining NX13410 - NX Mach 3 Machining NX13411 - NX Mach 3-E Machining NX13420 - NX Mach 3 Advanced Machining NX13421 - NX Mach 3-E Advanced Machining NX14400 - NX Mach 4 Manufacturing NX14401 - NX Mach 4-E Manufacturing NX30500 - NX Strength Wizard UG11085 - NX Strength Wizard UGD11085 - NX Strength Wizard Portfolio If you are not sure if you have these products, you can look at your license file or contact your account executive for help. 2. Installation Notes -------------------------------------------------------------------------- When installing NX Nastran 5 on a windows machine, you will see new options to load the 32-bit executable, the 64-bit executable or both. Installing on a 64-bit machine, the 64-bit executable will be selected by default and the 32-bit executable will be unchecked. If installing on a 32-bit machine, the 32-bit executable will be selected by default and the 64-bit will be unchecked. Loading both executables is only recommended when installing NX Nastran to an network server location that will be accessed by client machines of both types. 3. OPERATING SYSTEM REQUIREMENTS ------------------------------------------------------------------------ The following table lists the minimum operating system requirements to run NX Nastran 5. These are the operating system levels on which the product was built. However, the product was tested and runs on higher level operating systems. For example, the Windows executable was built on Windows 2000 but was also tested on Windows XP. You can use the ugsinfo command to display information about the system on which you're installing NX Nastran. See the NX Nastran Installation and Operations Guide for more information. Platform Build Architecture Additionally (Build Types) Operating System Name Supported OS ------------- ----------------------- ------------ ------------- INTEL Windows Windows 2000 SP3 i386 WXP SP2, (ILP-32) WXP-64(on EM64T/Opteron) INTEL Windows Windows Server 2003-64 SP1 em64tnt Windows XP-64 SP1 (LP-64) 4. Environment variable setting -------------------------------------------------------------------------- The following environment variables need to be set for NX to automatically pickup the nastran command. (a) UGII_NX_NASTRAN and (b) UGII_NX_NASTRAN_VERSION The UGII_NX_NASTRAN needs to point to the "nastran.exe" in the nastran installation directory. The UGII_NX_NASTRAN_VERSION should be set to 5.0 These two variables can be set in the file ugii_env.dat. This file resides in the UGII_ROOT_DIR\ugii directory on windows operating system 5. NX Nastran 5.0 settings ------------------------------------------------------------------------- After installing NX Nastran, edit the nast5.rcf file. This file is in the nastran install\conf directory. You can also edit this file using the Start->All Programs->NX Nastran 5.0 and edit the nast5.rcf file. Make sure the sdir variable points to a scratch directory. The default for this in NX Nastran 5.0 is $TEMP. In this file, $TEMP puts files in %TEMP% on Windows. You can also edit the auth or authorize variable. This needs to point to the correct license server. The server entries need to be separated using semi-colons. 基本上我觉得UGS的很多说明文档不是垃圾也是没啥大用的。你是想干啥？直接说，看看大家能不能帮忙 NX NASTRAN 地安装 ，好多论坛 说的都是改UG5环境变量，却没有NASTRAN5.0安装的步骤，不会安装啊，里面有好几个大约5个安装EXE，再不行 就用MSC的了 [url]http://www.simwe.com/forum/thread-836139-1-1.html[/url]
页:
[1]