SimWe仿真论坛 » E01：Fluent/CFX » 如何将ICEM划分的网格导入Fluent中？

titianyang 发表于 2008-6-2 00:32

如何将ICEM划分的网格导入Fluent中？

如何将ICEM划分的网格导入Fluent中？

bmwcz2000 发表于 2008-6-2 08:47

直接用FLUENT导入啊

用FLUENT导入:file/read/case/mesh，选中你要读的mesh就可以 了

linda_wang 发表于 2008-6-2 08:52

回复 1# 的帖子

在ICEM中保存好网格，接着OUTPUT网格文件，以Fluent的形式输出，得到fluent默认的网格文件。最后直接在Fluent中Import生成的网格即可

titianyang 发表于 2008-6-3 23:45

我用的ICEM11的版本，我在ICEM的输出格式中找不到有Fluent的输出格式啊。

cupid_venus 发表于 2008-6-4 18:36

有的，你仔细找找

Likj 发表于 2008-6-5 11:39

给你贴一个从其它地方找到的说明：
a }Q @eY(Ov3`(X Step-by-step:Dfl89J4U6Y ^AwF
1. Generate the pre-mesh
3{q|"gJ.c!o 2. Right-click on pre-mesh and select "Convert to unstructured mesh"*{vUww!Ga
3. From the mesh edit menu, run Check Mesh to make sure that everything is OK|/C4z2nzy k
4. Save the project
)rG}&E&v4B8c0i#b 5. From the "Output" menu tab, select Fluent 6 as the solver, then set up the boundary condition types,
@ {YUN,lwA then write out the fluent.msh file. It will ask you which *.uns file to load, but if you have saved the project,
&BML j1S?r ?'u the default should be right.q#]
Y{4]%x'x'H^a
6. Accept the defaults and it should write a file called fluent.msh , which always works for me.^|(q_?/iq'TD]
7. Optionally, from the file menu, close the mesh, save the project, exit icem and delete the *.uns files.VN"ex p%ucm;J
8. Optionally, gzip fluent.msh, then load fluent.msh.gz in Fluent.
V0uKT ryNHL R;a 1.save the mesh and go to OUTPUT. 1Ga ^+r8JI~9x
2.select the FLUENT solver with version.
{]x5mQ` 3.Click on write input(file window will come) 9E7d XfyG^
4.select the mesh file which u want to export and click open.
+JcB1ihM 5.export window will come, u can enter the name in the column of output file.
/j$cgK-K[1_j 6.the file will be saved in .msh format.

cecilia5201 发表于 2008-7-3 00:43

学习学习

查看完整版本: 如何将ICEM划分的网格导入Fluent中？